Kingsnake new gains and comparisons

[kingsnake]

Hey guys. kingsnake here. Just wanted to report that I have made some new gains. Small gains but gains none the less. My last gain that I have reported was in base girth which had increased from 6 inches to 6.1 inches. My old non bonepressed length was 8.75 inches and is now 8.95 inches. I am just a hair away from a 9 inch non bonepressed length. My new bonepressed length is now 9.4 inches. My midgirth is still 5.5 inches but I’m not to bummed about my midgirth because my PE workouts for the last few months have been primarily on length with only 1 hour jelqs and sqeezes in the evenings.


My routine has changed slightly but is still based on the same principles. Still doing 8 sets of hanging 5 days a week. My routine is as follows.

Morning session before work: 3 sets of inner penis hanging close to the base with my new riser clamp hanger and pulley system with 20 lbs for 18 minute sets, 10-15 minutes of edging for EQ purposes.

During my time at work I still wear the pipe repair clamp as an ADS but now I attach it to a piece of rope and strap it to my leg under my pants to keep light tension when sitting down. When standing up to walk around I release the strap and just let the weight of the repair clamp do it’s thing. I take off the repair clamp every 20 minutes for 5 minutes of recirculation of fresh blood.

Lunch break session: 2 sets of inner penis hanging close to the base with riser clamp with 20 lbs for 12-15 minutes sets, then 5-10 minutes of edging then get my ass back to my crappy job.

Evening session: 3 sets of inner penis hanging on pulley system with 20 lbs for 18 minutes sets. 20-30 minutes of manual bundled stretches using my riser clamp hanger as a power assist device. 30 minutes of slow wet jelqs and squeezes, then two 15 minutes sets of pumping at 4-6 gs, then 10-15 minutes of edging for EQ. Then I still wear a cable clamp for 1-2 hours to keep engorgement while healing takes place. While wearing the ADCs I take a shower and go out for a couple of hours or just chill out with Heather.

So far my hanging from the base method has granted me a gain of .49 total since August 2009. I am very excited about how far my hanging from the base method will take me in length and base girth. Hopefully in a couple of weeks to a month I can claim a true legit infamous 9 inch non bone pressed length instead of measuring 8.95. For you guys that are interested in length I have to say that hanging is definently the way to go.

Next I want to talk about a new hanging device I have created. The device is a new homemade hanger designed for heavy duty hanging. I have named the device the RISER CLAMP HANGER. The main components of the device is two riser clamps over very thick soft padding made from a lot of wrapping that comfortablely grips the shaft of the penis with a lot of surface area to hang heavy weights that will stress the ligs and inner penile tissues in the scrotom area. Like the pipe repair clamp I got the riser clamps from home deput and the riser clamps cost 4 bucks each. The size of the riser clamps that I bought are size 2” width 10 7/8.

Another thing I discovered with my new device is it can be used as a bundled hanger as well. I think the bundled hanging method will yield major girth increases at the shaft behind the riser clamp hanger leeding to the base. My preference is to hang closer to the base of my dick but for those who like the hanger 1 inch behind the glans, the device can be used for all types of manual stretches. You can put the riser clamp on for manual stretches or you can just stick your penis through the riser clamp’s center and do all types of manual tunica stretches. For those of you that are financial struggling like me this device is perfect for heavy comfortable hanging and stretching.

Next I want to talk about my hanging approach. Instead of the traditional way of hanging 1 inch behind the glans I have been hanging as close to the base as possible since August 2009. You see the ligaments and inner penile structures are stronger then the tunica closer to the glans and need heavier weight to deform. By hanging closer to the base heavier weights can be implimented to deform the ligs and inner structures without risking damage to the shaft closer to the glans and the delicate nerve bundle near the glans. Back in August when I first started hanging I did it the traditional way for 1 week where you place the hanger 1 inch behind the glans. With the traditional way my erection quality was shot to hell from all of the stress that the tunica closer to the glans was recieving with just 4 pounds. I immediately told my self that this wasn't for me then I thought to myself why concentrate on deforming the tunica 1 inch behind the glans and wreck my EQ when there is so much deforming potential with the base area of the dick and inner penis that's buried 1 - 3 inches in the body within the scrotum sac leeding to the anus.

A good visual example of this is Mandingo himself. If you look at Mandingo's dick from a side angle or an underneath angle when a girl is riding him, you'll see that his balls and inner penile structure is really exposed outside of his body thus maximizing his length. For him this could be genetic but I think my hanging philosophy is the key to exposing a great deal of hidden penis and deforming it to an even greater level of sheer tissue mass.
Now I'm not knocking hanging the traditional way because obviously lots of guys hang the traditional way and have made good gains. Im just say that hanging closer to the base to deform the inner penis from the body and ligs have worked really well for me with out wrecking my EQ. As a matter of fact my EQ has been top notch with this hanging approach.

With my hanging closer to the base approach that I have been doing since August 2009, I have gain .2 to my NBPEL and BPEL and I have also gained .2 to my base girth without any direct base girth work. The .2 gain in base girth was from heavy hanging towards the base. It has taken me a little over 5 months to worked my way up to 20 lbs and I think major gains will come my way as the weights get heavier over time.

Here are some pics of my recent gains starting from December 2009 leeding to January 2010 and my new riser clamp hanger in action. I also have a few pics of me using my new size on my next door neigbor Heather.

[kingsnake]

Here are some more pics of my hanging sessions and edging sessions.

[kingsnake]

Here are some more pics. These pics are of my physique progress with my bodybuilding efforts and me having some fun with my next door neigbor (Heather).

[kingsnake]

The next set of pics is more physique progress pics and me comparing my size to my neigbors shampoo bottle back when my BPEL was 9.2 inches.

[steel_meets_steel89]

Those are nice gains dude, hopefully when I'm in shape, I'll be that long-I doubt it though lol before yall moved this site, I was a member couple years back- my username was devouredbyvermin18, but when I signed it here on this one it said it was invalid-so I made a new one, but congrads on yer gains dude.

[steel_meets_steel89]

There's nothing wrong with small gains-as my dad has always told me, every little bit helps-so congrads again dude hey missed ya since I was out fer a couple of years- I was heavy duty in college- I had final exams from here to eternity almost, I only took two courses but two hard as hell courses.. and math was my weakest subject, and I failed math twice, so I had to take a break and now I'm back, I'm taking Computer 102 with a wonderful professor- fortunately and unfortunately he's recovering pnemonia(pardon my bad spelling)fortunate he's recovering unfortunate he had it.. As I mentioned in one of my threads in this site, I am gonna join the army, so I got back into jelqing- I kind of stopped when I was in college, because it was uptight.. but now while I'm working out to go into the army, I figure I'll start back into mynewsize.com, and restart gaining my gains. It's good to be back. My previous user was devouredbyvermin18.

[kingsnake]

Sounds good steel meets steel89. If you need any help or advice with your PE training then feel free to ask. Good luck with army dude. I commend you making that choice.

[steel_meets_steel89]

Originally Posted by kingsnake

Sounds good steel meets steel89. If you need any help or advice with your PE training then feel free to ask. Good luck with army dude. I commend you making that choice.

Thanks dude I will come home safe bro

[eighteven]

Well since you're offering advice KS, I could use some help. Trying to get to 9 myself. Are you still in the DC metro area?

[kingsnake]

Hey eighteven. I live in Atlanta Georgia. Let me know in detail what you need help with on your PE training and I'll give you advice based on my experiances and studies that I have done on plastic deformation.